Attentions during the operation of the electromagnetic roasting machine:
1. After the machine arrives , place it steady, check the gearbox and add engine oil.
2. For safety, please connect the ground wire, and check whether the voltage is normal.
3. Turn on the two direction switch to test that if the machine works well , and then turn on the heating switch to adjust temperature.
4. Get the materials ready.
5. If you need roast with salt, add a certain amount of refined salt, heat to about 50 degrees centigrade, then put materials into the roller, roast until the materials reach the effect you want.
6. When everything is ok, turn the two direction switch from "corotation" to "stop", waiting for two seconds, and then turn the switch from "stop" to "inversion".
7. When finshed, do not stop immediately, let the machine continue to rotate for 20 minutes, and then stop.
1. After the machine arrives , place it steady, check the gearbox and add engine oil.
2. For safety, please connect the ground wire, and check whether the voltage is normal.
3. Turn on the two direction switch to test that if the machine works well , and then turn on the heating switch to adjust temperature.
4. Get the materials ready.
5. If you need roast with salt, add a certain amount of refined salt, heat to about 50 degrees centigrade, then put materials into the roller, roast until the materials reach the effect you want.
6. When everything is ok, turn the two direction switch from "corotation" to "stop", waiting for two seconds, and then turn the switch from "stop" to "inversion".
7. When finshed, do not stop immediately, let the machine continue to rotate for 20 minutes, and then stop.
